Tektronix Keithley SourceMeter 2470 Reference Manual

Section
14: TSP command reference 2470 High Voltage SourceMeter Instrument
Reference Manual
14-90 2470-901-01 Rev. A / May 2019
localnode.model
This attribute stores the model number.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
model = localnode.model
model
The model number of the instrument
Example
print(localnode.model)
Outputs the model number of the local node. For example:
2470
Also see
localnode.serialno (on page 14-92)
localnode.password
This attribute stores the instrument password.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (W)
No
Rear-panel LAN reset
Nonvolatile memory
"admin"
Usage
localnode.password = "password"
password
A string that contains the instrument password (maximum 30 characters)
Details
When the access to the instrument is set to protected or lockout, this is the password that is used to
gain access.
If you forget the password, you can reset the password to the default:
1. On the front panel, press MENU.
2. Under System, select Info/Manage.
3. Select Password Reset.
You can also reset the password and the LAN settings from the rear panel by inserting a straightened
paper clip into hole below LAN RESET.
Example
localnode.password = "N3wpa55w0rd"
Changes the password to N3wpa55w0rd.
Also see
localnode.access (on page 14-88)

Tektronix Keithley SourceMeter 2470 Specifications

General

Brand	Tektronix
Model	Keithley SourceMeter 2470
Category	Measuring Instruments
Language	English