14: TSP command reference 2470 High Voltage SourceMeter Instrument
14-4 2470-901-01 Rev. A / May 2019
Using the TSP command reference
The TSP command reference contains detailed descriptions of each of the TSP commands that you
can use to control your instrument. Each command description is broken into subsections. The figure
below shows an example of a command description.
Figure 151: Example instrument command description
The subsections contain information about the command. The subsections are:
• Command name, brief description, and summary table
• Usage
• Details
• Example
• Also see
The content of each of these subsections is described in the following topics.
To Next Page
Loading...
