Tektronix Keithley SourceMeter 2470

Section
14: TSP command reference 2470 High Voltage SourceMeter Instrument
Reference Manual
14-256 2470-901-01 Rev. A / May 2019
trigger.timer[N].reset()
This function resets trigger timer settings to their default values.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
trigger.timer[N].reset()
N
Trigger timer number (1 to 4)
Details
The trigger.timer[N].reset() function resets the following attributes to their default values:
 trigger.timer[N].count
 trigger.timer[N].delay
 trigger.timer[N].delaylist
 trigger.timer[N].enable
 trigger.timer[N].start.fractionalseconds
 trigger.timer[N].start.generate
 trigger.timer[N].start.seconds
 trigger.timer[N].stimulus
It also clears trigger.timer[N].overrun.
Example
trigger.timer[1].reset()
Resets the attributes associated with timer 1 to their default
values.
Also see
trigger.timer[N].count (on page 14-252)
trigger.timer[N].delay (on page 14-253)
trigger.timer[N].delaylist (on page 14-254)
trigger.timer[N].enable (on page 14-255)
trigger.timer[N].start.fractionalseconds (on page 14-257)
trigger.timer[N].start.generate (on page 14-257)
trigger.timer[N].start.overrun (on page 14-258)
trigger.timer[N].start.seconds (on page 14-259)
trigger.timer[N].start.stimulus (on page 14-259)