Tektronix Keithley SourceMeter 2470 Reference Manual

Section
14: TSP command reference 2470 High Voltage SourceMeter Instrument
Reference Manual
14-206 2470-901-01 Rev. A / May 2019
trigger.lanin[N].clear()
This function clears the event detector for a LAN trigger.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
trigger.lanin[N].clear()
N
The LAN event number (1 to 8) to clear
Details
The trigger event detector enters the detected state when an event is detected. This function clears a
trigger event detector and discards the history of the trigger packet.
This function clears all overruns associated with this LAN trigger.
Example
trigger.lanin[5].clear()
Clears the event detector with LAN event trigger 5.
Also see
trigger.lanin[N].overrun (on page 14-207)
trigger.lanin[N].edge
This attribute sets the trigger operation and detection mode of the specified LAN event.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes Restore configuration
Instrument reset
Power cycle
Configuration script trigger.EDGE_EITHER
Usage
edgeMode = trigger.lanin[N].edge
trigger.lanin[N].edge = edgeMode
edgeMode
The trigger mode; see the Details for more information
N
The LAN event number (1 to 8)

Tektronix Keithley SourceMeter 2470 Specifications

General

Brand	Tektronix
Model	Keithley SourceMeter 2470
Category	Measuring Instruments
Language	English