Tektronix Keithley SourceMeter 2470

Section
12: SCPI command reference 2470 High Voltage SourceMeter Instrument
Reference Manual
12-136 2470-901-01 Rev. A / May 2019
Example
TRACe:STAT:MINimum?
Returns the minimum reading value in the default buffer
defbuffer1
.
TRACe:STAT:MINimum? "testData"
Returns the minimum reading value in the user-defined buffer
testData
.
Also see
Reading buffers (on page 6-1)
Remote buffer operation (on page 6-25)
:TRACe:MAKE (on page 12-127)
:TRACe:STATistics:AVERage? (on page 12-133)
:TRACe:STATistics:CLEar (on page 12-134)
:TRACe:STATistics:MAXimum? (on page 12-135)
:TRACe:STATistics:PK2Pk? (on page 12-136)
:TRACe:STATistics:STDDev? (on page 12-137)
:TRACe:STATistics:PK2Pk?
This command returns the peak-to-peak value of all readings in the reading buffer.
Type Affected by Where saved Default value
Query only
Not applicable
Not applicable
Not applicable
Usage
:TRACe:STATistics:PK2Pk?
:TRACe:STATistics:PK2Pk? "<bufferName>"
<bufferName>
A string that indicates the reading buffer; the default buffers (defbuffer1 or
defbuffer2) or the name of a user-defined buffer; if no buffer is specified,
defbuffer1
is used
Example
TRACe:STAT:PK2Pk?
Returns the peak-to-peak reading value in the default buffer
defbuffer1
.
TRACe:STAT:PK2Pk? "testData"
Returns the peak-to-peak reading value in the user-defined
buffer
testData
.
Also see
Reading buffers (on page 6-1)
Remote buffer operation (on page 6-25)
:TRACe:MAKE (on page 12-127)
:TRACe:STATistics:AVERage? (on page 12-133)
:TRACe:STATistics:CLEar (on page 12-134)
:TRACe:STATistics:MAXimum? (on page 12-135)
:TRACe:STATistics:MINimum? (on page 12-135)
:TRACe:STATistics:STDDev? (on page 12-137)