Tektronix Keithley SourceMeter 2470 Reference Manual

2470
High Voltage SourceMeter Instrument Reference Manual Section 14:
TSP command reference
2470-901-01 Rev. A / May 2019 14-195
Details
The trigger.blender[N].reset() function resets the following attributes to their factory
defaults:
• trigger.blender[N].orenable
• trigger.blender[N].stimulus[M]
It also clears trigger.blender[N].overrun.
Example
trigger.blender[1].reset()
Resets the trigger blender 1 settings to
factory defaults.
Also see
trigger.blender[N].orenable (on page 14-193)
trigger.blender[N].overrun (on page 14-194)
trigger.blender[N].stimulus[M] (on page 14-195)
trigger.blender[N].stimulus[M]
This attribute specifies the events that trigger the blender.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW)
Yes
Restore configuration
Instrument reset
Power cycle
Trigger blender N reset
Configuration script
trigger.EVENT_NONE
Usage
event = trigger.blender[N].stimulus[M]
trigger.blender[N].stimulus[M] = event
event
The event that triggers the blender action; see Details
N
An integer that represents the trigger event blender (up to two)
M
An integer representing the stimulus index (1 to 4)
Details
There are four stimulus inputs that can each select a different event.
Use none to disable the blender input.

Tektronix Keithley SourceMeter 2470 Specifications

General

Brand	Tektronix
Model	Keithley SourceMeter 2470
Category	Measuring Instruments
Language	English