Tektronix Keithley SourceMeter 2470

Section
13: Introduction to TSP commands 2470 High Voltage SourceMeter Instrument
Reference Manual
13-48 2470-901-01 Rev. A / May 2019
SMU
SMU commands and functions are unique to SMU instruments. You can use the SMU commands to
control the instrument source and measure functions.
localnode.linefreq (on page 14-89)
smu.terminals (on page 14-178)
smu.interlock.tripped (on page 14-109)
SMU measure commands are:
smu.measure.autorange (on page 14-110)
smu.measure.autorangehigh (on page 14-111)
smu.measure.autorangelow (on page 14-112)
smu.measure.autozero.enable (on page 14-113)
smu.measure.autozero.once() (on page 14-114)
smu.measure.configlist.catalog() (on page 14-114)
smu.measure.configlist.create() (on page 14-115)
smu.measure.configlist.delete() (on page 14-116)
smu.measure.configlist.query() (on page 14-117)
smu.measure.configlist.recall() (on page 14-118)
smu.measure.configlist.size() (on page 14-119)
smu.measure.configlist.store() (on page 14-120)
smu.measure.count (on page 14-121)
smu.measure.displaydigits (on page 14-123)
smu.measure.filter.count (on page 14-124)
smu.measure.filter.enable (on page 14-125)
smu.measure.filter.type (on page 14-126)
smu.measure.func (on page 14-127)
smu.measure.limit[Y].audible (on page 14-128)
smu.measure.limit[Y].autoclear (on page 14-129)
smu.measure.limit[Y].clear() (on page 14-129)
smu.measure.limit[Y].enable (on page 14-130)
smu.measure.limit[Y].fail (on page 14-131)
smu.measure.limit[Y].high.value (on page 14-133)
smu.measure.limit[Y].low.value (on page 14-133)
smu.measure.math.enable (on page 14-134)
smu.measure.math.format (on page 14-135)
smu.measure.math.mxb.bfactor (on page 14-136)
smu.measure.math.mxb.mfactor (on page 14-137)
smu.measure.math.percent (on page 14-138)
smu.measure.nplc (on page 14-139)
smu.measure.offsetcompensation (on page 14-140)
smu.measure.range (on page 14-141)
smu.measure.read() (on page 14-142)
smu.measure.readwithtime() (on page 14-143)
smu.measure.rel.acquire() (on page 14-144)
smu.measure.rel.enable (on page 14-145)
smu.measure.rel.level (on page 14-146)