Tektronix Keithley SourceMeter 2470 Reference Manual

2470
High Voltage SourceMeter Instrument Reference Manual Section 14:
TSP command reference
2470-901-01 Rev. A / May 2019 14-9
Example
buffer.clearstats()
Clears statistics for
defbuffer1
.
buffer.clearstats(testData)
Clears statistics for testData.
Also see
buffer.getstats() (on page 14-10)
buffer.delete()
This function deletes a user-defined reading buffer.
Type TSP-Link accessible
Affected by Where saved Default value
Function
Yes
Usage
buffer.delete(bufferName)
bufferName
The name of a user-defined reading buffer
Details
You cannot delete the default reading buffers, defbuffer1 and defbuffer2.
Example
buf400 = buffer.make(400)
smu.measure.read(buf400)
printbuffer(1, buf400.n, buf400.relativetimestamps)
buffer.delete(buf400)
Create a 400-element reading buffer named buf400.
Make measurements and store the readings in buf400.
Print the relative timestamps for each reading in the buffer.
Example output, assuming five readings are stored in the buffer:
0, 0.412850017, 0.821640085, 1.230558058, 1.629523236
Delete
buf400
.
Also see
buffer.make() (on page 14-12)
bufferVar.clear() (on page 14-18)
printbuffer() (on page 14-100)
Reading buffers (on page 6-1)
Remote buffer operation (on page 6-25)

Tektronix Keithley SourceMeter 2470 Specifications

General

Brand	Tektronix
Model	Keithley SourceMeter 2470
Category	Measuring Instruments
Language	English