2: Installation 2470 High Voltage SourceMeter Instrument
2-30 2470-901-01 Rev. A / May 2019
The instrument web page resides in the firmware of the instrument. Changes you make through the
web interface are immediately made in the instrument.
When the LAN and instrument establish a connection, you can open the web page for the instrument.
To access the web interface:
1. Open a web browser on the host computer.
2. Enter the IP address of the instrument in the address box of the web browser. For example, if the
instrument IP address is 192.168.1.101, enter 192.168.1.101 in the browser address box.
3. Press Enter on the computer keyboard to open the instrument web page.
4. If prompted, enter a user name and password. The default is admin for both.
If the web page does not open in the browser, see LAN troubleshooting suggestions (on page 2-24).
To find the IP Address of the instrument, press the Communications indicator in the upper left corner
of the home screen.
Web interface Home page
Figure 23: Model 2470 web interface Home page
To Next Page
Loading...
Need help?
General
