Xerox WorkCentre 6505 Service Manual

4-64 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
General Troubleshooting
FB Motor Test
Note
The FB Motor automatically stops at the limit of travel in both directions.
1. Enter Service Diagnostics (page 4-8).
2. Open the Platen Cover.
3. Perform the Fax/Scanner Diag > Scanner Maintenance > IIT I/O Check >FB
Motor test.
4. Press the Arrow buttons to select Forward.
5. Press OK to run the test.
6. Check that the carriage moves to the Right.
7. Press Stop to return one step higher menu.
8. Repeat the Lamp test Fax/Scanner Diag > Scanner Maintenance > IIT I/O
Check >FB Motor test.
9. Press the Arrow buttons to select Reverse.
10. Check that the carriage move to the Left.
11. Press Stop to stop the test.
s6500-103
http://www.manuals4you.com

Xerox WorkCentre 6505 Specifications

General

Print Technology	Laser
Copy Resolution	Up to 600 x 600 dpi
Standard Paper Capacity	250 sheets
ADF Capacity	35 sheets
Functions	Print, Copy, Scan, Fax
Processor	533 MHz
Memory	256 MB
Fax Transmission Speed	33.6 kbps
Monthly Duty Cycle	40, 000 pages
Connectivity	USB 2.0, Ethernet 10/100Base-TX
Maximum Paper Size	8.5 x 14 in
Operating System Compatibility	Windows, Mac, Linux
Print Resolution	Up to 1200 x 2400 dpi