Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-30
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cloud discovery
show cloud discovery
To display discovery information about the cloud, use the show cloud discovery command.
show cloud discovery {config | stats | status}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows information about a cloud.
switch# show cloud discovery config
Auto discovery: Enabled
The following example shows statistics about a cloud.
sswitch# show cloud discovery stats
Global statistics
Number of Auto Discovery = 4
Number of Manual (demand) Discovery = 0
Number of cloud discovery (ping) messages sent = 17
Number of cloud discovery (ping) success = 1
Related Commands
config Displays global discovery configuration information.
stats Displays discovery statistics information.
status Displays discovery status information.
Release Modification
3.0(1) This command was introduced.
Command Description
cloud discover Initiates manual, on-demand cloud discovery.
cloud discovery Configures cloud discovery.
cloud-discovery Enables discovery of cloud memberships.
show cloud membership Displays information about members of a cloud.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available