Send documentation comments to mdsfeedback-doc@cisco.com
22-185
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb status
show islb status
To display iSCSI server load balancing (iSLB) Cisco Fabric Services status, use the show islb status
command.
show islb status
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows iSLB CFS status.
switch# show islb status
iSLB Distribute is enabled
iSLB CFS Session does not exist
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
show islb cfs-session
status
Displays iSLB session information.
show islb initiator Displays iSLB initiator information.
show islb merge status Displays iSLB merge status information.
show islb pending Displays iSLB pending configurations.
show islb pending-diff Displays iSLB CFS pending configuration differences.
show islb session Displays iSLB session information.
show islb virtual-target Displays iSLB virtual target information.
show islb vrrp Display iSLB VRRP load balancing information.