EasyManuals Logo

Cisco MDS 9000 Series Command Reference

Cisco MDS 9000 Series
1464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1212 background imageLoading...
Page #1212 background image
Send documentation comments to mdsfeedback-doc@cisco.com
22-238
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show module
Examples The following example displays information about the modules on the switch.
switch# show module
Mod Ports Module-Type Model Status
--- ----- ------------------------------- ------------------ ------------
2 32 Advanced Services Module DS-X9032-SMV powered-dn
4 32 Advanced Services Module DS-X9032-SMV powered-dn
5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active *
6 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 ha-standby
8 32 1/2 Gbps FC Module DS-X9032 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- ----------- ------ --------------------------------------------------
5 1.2(2) 0.610 --
6 1.2(2) 0.610 --
8 1.2(2) 0.3 21:c1:00:0b:46:79:f1:40 to 21:e0:00:0b:46:79:f1:40
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
5 00-d0-97-38-b4-01 to 00-d0-97-38-b4-05 JAB06350B0H
6 00-d0-97-38-b3-f9 to 00-d0-97-38-b3-fd JAB06350B1R
8 00-05-30-00-2b-e2 to 00-05-30-00-2b-e6 jab062407x4
* this terminal session
The following example displays diagnostic information about the modules on the switch.
switch# show module diag
Diag status for module 2 (. = PASS, F = FAIL, N = N/A)
CPU .
SPROM .
ASICS .
Diag status for module 4 (. = PASS, F = FAIL, N = N/A)
CPU .
SPROM .
ASICS .
The following example displays uptime information about the modules on the switch.
switch# show module uptime
------ Module 1 -----
Module Start Time: Wed Apr 14 18:12:48 2004
Up Time: 16 days, 5 hours, 59 minutes, 41 seconds
------ Module 6 -----
Module Start Time: Wed Apr 14 18:11:57 2004
Up Time: 16 days, 6 hours, 0 minutes, 32 second

Table of Contents

Other manuals for Cisco MDS 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MDS 9000 Series and is the answer not in the manual?

Cisco MDS 9000 Series Specifications

General IconGeneral
CategorySwitch
Operating SystemCisco NX-OS
PortsVaries by model
ProtocolsFibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
RedundancyRedundant supervisors, power supplies, and fans
ManagementCisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization SupportVSANs (Virtual SANs)
Security FeaturesFibre Channel Security Protocol (FC-SP)
Hot Swappable Componentspower supplies, fans
Power Supply OptionsAC and DC options available

Related product manuals