EasyManuals Logo

Cisco MDS 9000 Series Command Reference

Cisco MDS 9000 Series
1464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1034 background imageLoading...
Page #1034 background image
Send documentation comments to mdsfeedback-doc@cisco.com
22-60
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fabric-binding
show fabric-binding
To display configured fabric binding information, use the show fabric-binding command in EXEC
mode.
show fabric-binding {database [active] [vsan vsan-id] | efmd statistics [vsan vsan-id] |
statistics [vsan vsan-id] | status [vsan vsan-id] | violations [last number]}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured fabric binding database information.
switch# show fabric-binding database
--------------------------------------------------
Vsan Logging-in Switch WWN Domain-id
--------------------------------------------------
1 21:00:05:30:23:11:11:11 0x66(102)
1 21:00:05:30:23:1a:11:03 0x19(25)
1 20:00:00:05:30:00:2a:1e 0xea(234)
4 21:00:05:30:23:11:11:11 0x66(102)
4 21:00:05:30:23:1a:11:03 0x19(25)
61 21:00:05:30:23:1a:11:03 0x19(25)
61 21:00:05:30:23:11:11:11 0x66(102)
[Total 7 entries]
database Displays configured database information.
active Displays the active database configuration information.
vsan vsan-id Specifies the FICON-enabled VSAN ID. The range is 1 to 4093.
efmd statistics Displays Exchange Fabric Membership Data (EFMD) statistics.
statistics Displays fabric binding statistics.
status Displays fabric binding status.
violations Displays violations in the fabric binding configuration.
last number Specifies recent violations. The range is 1 to 100.
Release Modification
1.3(1) This command was introduced.

Table of Contents

Other manuals for Cisco MDS 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MDS 9000 Series and is the answer not in the manual?

Cisco MDS 9000 Series Specifications

General IconGeneral
CategorySwitch
Operating SystemCisco NX-OS
PortsVaries by model
ProtocolsFibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
RedundancyRedundant supervisors, power supplies, and fans
ManagementCisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization SupportVSANs (Virtual SANs)
Security FeaturesFibre Channel Security Protocol (FC-SP)
Hot Swappable Componentspower supplies, fans
Power Supply OptionsAC and DC options available

Related product manuals