Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
18-23
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
port-security distribute
port-security distribute
To enable Cisco Fabric Services (CFS) distribution for port security, use the port-security distribute
command. To disable this feature, use the no form of the command.
port-security distribute
no port-security distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the port-security commit command.
Examples The following example shows how to distribute the port security configuration to the fabric.
switch# config terminal
switch(config)# port-security distribute
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
port-security commit Commits the port security configuration changes to the active configuration.
show port-security Displays port security information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available