Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-364
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show zone
show zone
To display zone information, use the show zone command.
show zone
[active [vsan vsan-id] |
ess [vsan vsan-id] |
member {fcalias alias-name | fcid fcid-id [lun lun-id] | pwwn wwn [lun lun-id]} [active | vsan
vsan-id] |
name string [active] [vsan vsan-id] |
statistics [lun-zoning [vsan vsan-id] | read-only-zoning [vsan vsan-id] | vsan vsan-id] |
status [vsan vsan-range]
vsan [vsan vsan-id]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured zone information.
switch# show zone
zone name Zone3 vsan 1
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:9c:48:e5
zone name Zone2 vsan 2
active Displays zones which are part of active zone set.
ess Displays ESS information.
member Displays all zones in which the given member is part of.
name Displays members of a specified zone.
statistics Displays zone server statistics.
status Displays zone server current status.
vsan vsan-id Displays zones belonging to the specified VSAN ID. The range is 1 to 4093.
lun lun-id Specifies a LUN ID.
lun-zoning Displays LUN zoning related statistics
read-only-zoning Displays read-only zoning related statistics
Release Modification
1.3(4) This command was introduced.
2.1(1a) Modified the show zone status display.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available