Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-59
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear line
clear line
To clear VTY sessions, use the clear line command in EXEC mode.
clear line vty-name
Syntax Description
Defaults None.
Command Modes EXEC.
Command History
Examples The following example clears one ARP cache entry:
switch# clear line Aux
arp clear successful
Related Commands
vty-name Specifies the VTY name (maximum 64 characters).
Release Modification
1.2(1) This command was introduced.
Command Description
show line Displays line information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available