Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-203
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ivr fcdomain database
show ivr fcdomain database
To display the IVR fcdomain database that contains the persistent FC ID mapping, use the show ivr
fcdomain database command.
show ivr fcdomain database [autonomous-fabric-num afid-num vsan vsan-id]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays all IVR fcdomain database entries.
switch# show ivr fcdomain database
----------------------------------------------------
AFID Vsan Native-AFID Native-Vsan Virtual-domain
----------------------------------------------------
1 2 10 11 0xc(12)
21 22 20 11 0xc(12)
Number of Virtual-domain entries: 2
----------------------------------------------------
AFID Vsan Pwwn Virtual-fcid
----------------------------------------------------
21 22 11:22:33:44:55:66:77:88 0x114466
21 22 21:22:33:44:55:66:77:88 0x0c4466
21 22 21:22:33:44:55:66:78:88 0x0c4466
Number of Virtual-fcid entries: 3
autonomous-fabric-num afid-num Specifies the AFID. The range is 1 to 64.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.1(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available