Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
23-7
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tacacs-server directed-request
tacacs-server directed-request
To specify a TACACS+ server to send authentication requests to when logging in, use the tacacs-server
directed-request command. To revert to sending the authentication request to the configured group, use
the no form of the command.
tacacs-server directed-request
no tacacs-server directed-request
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines The user can specify the username@servername during login. The user name is sent to the server name
for authentication.
Examples The following example shows how to specify a TACACS+ server to send authentication requests when
logging in.
switch# config terminal
switch(config)# tacacs-server directed-request
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
show tacacs-server Displays all configured TACACS+ server parameters.
show tacacs-server
directed request
Displays a directed request TACACS+ server configuration.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available