Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-27
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug fabric-binding
debug fabric-binding
To enable debugging for the fabric binding feature, use the debug fabric-binding command in EXEC
mode. To disable a debug command, use the no form of the command or use the no debug all command
to turn off all debugging.
debug fabric-binding {all | efmd {db-events | errors | merge {errors | events | packets}} |
mts-events | pss-events} | errors [vsan vsan-id] | events [vsan vsan-id] | mts-events |
pss-events | snmp-events | trace [vsan vsan-id]}
no debug fabric-binding {all | efmd {db-events | errors | merge {errors | events | packets}} |
mts-events | pss-events} | errors [vsan vsan-id] | events [vsan vsan-id] | mts-events |
pss-events | snmp-events | trace [vsan vsan-id]}
Syntax Description
Defaults
Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug fabric-binding all command is
issued:
switch# debug fabric-binding all
all Enables debugging for all fabric binding features.
efmd Enables debugging for Exchange Fabric Membership Data (EFMD) protocol.
db-events Enables debugging for EFMD protocol database events.
merge Enables debugging for EFMD protocol merges.
packets Enables debugging for EFMD protocol packets.
errors Enables debugging for fabric binding errors.
vsan vsan-id Specifies the VSAN ID. The range is 1 to 4093.
events Enables debugging for fabric binding events.
mts-events Enables debugging for fabric binding MTS events.
pss-events Enables debugging for fabric binding PSS events.
snmp-events Enables debugging for fabric binding SNMP events
trace Enables debugging for fabric binding traces.
Release Modification
1.3(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available