Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-101
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system startup-config
system startup-config
To release a system startup configuration lock, use the system startup-config command in EXEC mode.
system startup-config unlock lock-id
Syntax Description
Defaults Disabled.
Command Modes EXEC.
Command History
Usage Guidelines The system startup-config command allows you to unlock or release the rr_token lock. To determine
the lock-id, use the show system internal sysmgr startup-config locks command.
Examples The following example releases the system configuration lock with identifier 1.
switch# system startup-config unlock 1
Related Commands
unlock lock-id Configures the system startup-config unlock ID number. The range is 0 to
65536.
Release Modification
2.0(1b) This command was introduced.
Command Description
show system Displays system information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available