Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
22-244
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show nasb
show nasb
To display the Network-Accelerated Serverless Backup (NASB) configuration on the Storage Services
Module (SSM), use the show nasb command in EXEC mode.
show nasb [module slot] [vsan vsan-id]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the NASB configuration on all SSM modules in the switch.
switch# show nasb
NASB: module 4 vsan 1:DPP-1, VT-nWWN=2700000530002926, pWWN=2701000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-2, VT-nWWN=2702000530002926, pWWN=2703000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-3, VT-nWWN=2704000530002926, pWWN=2705000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-4, VT-nWWN=2706000530002926, pWWN=2707000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-5, VT-nWWN=2708000530002926, pWWN=2709000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-6, VT-nWWN=270a000530002926, pWWN=270b000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-7, VT-nWWN=270c000530002926, pWWN=270d000530002926 (provisioned)
NASB: module 4 vsan 1:DPP-8, VT-nWWN=270e000530002926, pWWN=270f000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-1, VT-nWWN=26f0000530002926, pWWN=26f1000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-2, VT-nWWN=26f2000530002926, pWWN=26f3000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-3, VT-nWWN=26f4000530002926, pWWN=26f5000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-4, VT-nWWN=26f6000530002926, pWWN=26f7000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-5, VT-nWWN=26f8000530002926, pWWN=26f9000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-6, VT-nWWN=26fa000530002926, pWWN=26fb000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-7, VT-nWWN=26fc000530002926, pWWN=26fd000530002926 (provisioned)
NASB: module 4 vsan 3:DPP-8, VT-nWWN=26fe000530002926, pWWN=26ff000530002926 (provisioned)
NASB: module 8 vsan 3:DPP-1, VT-nWWN=2500000530002926, pWWN=2501000530002926 (not
provisioned)
NASB: module 8 vsan 3:DPP-2, VT-nWWN=2502000530002926, pWWN=2503000530002926 (not
provisioned)
NASB: module 8 vsan 3:DPP-3, VT-nWWN=2504000530002926, pWWN=2505000530002926 (not
provisioned)
NASB: module 8 vsan 3:DPP-4, VT-nWWN=2506000530002926, pWWN=2507000530002926 (not
provisioned)
NASB: module 8 vsan 3:DPP-5, VT-nWWN=2508000530002926, pWWN=2509000530002926 (not
provisioned)
module slot Specifies the slot number with the SSM where NASB is configured.
vsan vsan-id Displays information for the specified VSAN ID. The range is 1 to 4093.
Release Modification
2.1(1a) This command was introduced.