Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-122
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr copy active-zoneset full-zoneset
ivr copy active-zoneset full-zoneset
To copy the active zone set to the full zone set, use the ivr copy active-zoneset full-zoneset command
in EXEC mode.
ivr copy active-zoneset full-zoneset
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Copying the active zone set to the full zone set may overwrite common zone and zone set configurations
in the full zoning database.
Examples The following example copies the active zone set to the full zone set.
switch# ivr copy active-zoneset full-zoneset
WARNING: This command may overwrite common zones/zonesets
in the IVR full zoneset database
Please enter yes to proceed.(y/n) [n]?
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
ivr copy active-topology
user-configured
topology
Copies the active inter-VSAN routing (IVR) VSAN topology to the user
configured topology.
ivr copy auto-topology
user-configure topology
Copies the automatically discovered inter-VSAN routing (IVR) VSAN
topology to the user configured topology.
show ivr zoneset active Displays the active IVR zone set.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available