EasyManuals Logo

Cisco MDS 9000 Series Command Reference

Cisco MDS 9000 Series
1464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1019 background imageLoading...
Page #1019 background image
Send documentation comments to mdsfeedback-doc@cisco.com
22-45
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show crypto map domain ipsec
Crypto Map "cm50" 1 ipsec
Peer = 10.10.50.2
IP ACL = aclany
permit ip any any
Transform-sets: 3des-md5,
Security Association Lifetime: 450 gigabytes/3600 seconds
PFS (Y/N): N
Interface using crypto map set cm50:
GigabitEthernet1/2.1
Crypto Map "cm51" 1 ipsec
Peer = 10.10.51.2
IP ACL = aclany
permit ip any any
Transform-sets: 3des-md5,
Security Association Lifetime: 450 gigabytes/3600 seconds
PFS (Y/N): N
Interface using crypto map set cm51:
GigabitEthernet1/2.2
Crypto Map "cm60" 1 ipsec
Peer = 10.10.60.2
IP ACL = acl60
permit ip 10.10.60.0 255.255.255.0 10.10.60.0 255.255.255.0
Transform-sets: 3des-md5,
Security Association Lifetime: 450 gigabytes/3600 seconds
PFS (Y/N): N
Interface using crypto map set cm60:
GigabitEthernet1/2
Crypto Map "cm100" 1 ipsec
Peer = 10.10.100.221
IP ACL = aclmds100
permit ip 10.10.100.231 255.255.255.255 10.10.100.221 255.255.255.255
Transform-sets: 3des-md5, 3des-sha, des-md5, des-sha,
Security Association Lifetime: 450 gigabytes/3600 seconds
PFS (Y/N): N
Crypto Map "cm100" 2 ipsec
Peer = Auto Peer
IP ACL = acl100
permit ip 10.10.100.0 255.255.255.0 10.10.100.0 255.255.255.0
Transform-sets: 3des-md5, 3des-sha, des-md5, des-sha,
Security Association Lifetime: 450 gigabytes/3600 seconds
PFS (Y/N): N
Related Commands Command Description
crypto ipsec enable Enables IPsec.
crypto map domain ipsec Enters IPsec map configuration mode.

Table of Contents

Other manuals for Cisco MDS 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MDS 9000 Series and is the answer not in the manual?

Cisco MDS 9000 Series Specifications

General IconGeneral
CategorySwitch
Operating SystemCisco NX-OS
PortsVaries by model
ProtocolsFibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
RedundancyRedundant supervisors, power supplies, and fans
ManagementCisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization SupportVSANs (Virtual SANs)
Security FeaturesFibre Channel Security Protocol (FC-SP)
Hot Swappable Componentspower supplies, fans
Power Supply OptionsAC and DC options available

Related product manuals