Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
11-98
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
islb abort
islb abort
To discard a pending iSCSI Server Load Balancing (iSLB) configuration, use the islb abort command.
islb abort
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines You can use the islb abort command to discard the pending changes to the iSLB configuration and
release the fabric lock. This action has no effect on the active configuration on any switch in the fabric.
The islb abort command can be issued only by the user who started the Cisco Fabric Services (CFS)
session and only on the switch that started the CFS session.
Examples The following example discards the pending iSLB configuration distribution.
switch# config t
switch(config)# islb abort
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
islb commit Commits the iSLB configuration distribution and releases the fabric lock.
show islb cfs-session
status
Displays iSLB information.
show islb pending Displays the pending configuration changes.
show islb pending-diff Displays the differences between the pending configuration and the
current configuration.
clear islb session Clears a pending iSLB configuration. This command can be issued on any
switch by a user with admin privileges.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available