Send documentation comments to mdsfeedback-doc@cisco.com
18-41
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
pwwn (fcdomain database configuration submode)
pwwn (fcdomain database configuration submode)
To map a pWWN to a persistent FC ID for IVR, use the pwwn command in IVR fcdomain database
configuration submode. To remove the mapping for the pWWN, use the no form of the command.
pwwn pwwn-id fc-id
no pwwn pwwn-id
Syntax Description
Defaults None.
Command Modes fcdomain database configuration submode.
Command History
Usage Guidelines Only one FC ID can be mapped to a pWWN.
Examples The following example shows how to map the pWWN to the persistent FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# pwwn 11:22:33:44:55:66:77:88 0x123456
The following example shows how to remove the mapping between the pWWN and the FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# no pwwn 11:22:33:44:55:66:77:88
Related Commands
pwwn-id Specifies the pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h
is a hexadecimal number.
fc-id Specifies the FC ID of the device.
Release Modification
2.1(2) This command was introduced.
Command Description
ivr fcdomain database
autonomous-fabric-num
Creates IVR persistent FC IDs.
native-autonomous-fabric-num Creates an IVR persistent FC ID database entry.
show ivr fcdomain database Displays IVR fcdomain database entry information.
To Next Page
Loading...
Need help?
General
