Cisco MDS 9000 Series Command Reference

CHAPTER
Send documentation comments to mdsfeedback-doc@cisco.com
5-1
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
5
D Commands
The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric
switches. All commands are shown here in alphabetical order regardless of command mode. See the
“Command Modes” section to determine the appropriate mode for each command. For more
information, refer to the Cisco MDS 9000 Family CLI Configuration Guide.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available