EasyManuals Logo

Cisco MDS 9000 Series Command Reference

Cisco MDS 9000 Series
1464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #879 background imageLoading...
Page #879 background image
Send documentation comments to mdsfeedback-doc@cisco.com
21-11
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
scsi-target
scsi-target
To configure SCSI target discovery, use the scsi-target command in configuration mode. To remove
SCSI target discovery, use the no form of the command.
scsi-target {auto-poll [vsan vsan-id] | discovery | ns-poll [vsan vsan-id] | on-demand [vsan
vsan-id]}
no scsi-target {auto-poll [vsan vsan-id] | discovery | ns-poll [vsan vsan-id] | on-demand [vsan
vsan-id]}
Syntax Description
Defaults SCSI target discovery for each option is on.
Command Modes Configuration mode.
Command History
Usage Guidelines Automatic global SCSI target discovery is on by default. Discovery can also be triggered for specific
VSANs using on-demand, name server polling, or auto-polling options. All options are on by default.
Use the no scsi-target discovery command to turn off all discovery options. You can also turn off
specific options by using the no form of the command.
Examples The following example configures SCSI target auto-polling discovery for VSAN 1.
switch# config t
switch(config)# scsi-target auto-poll vsan 1
The following example removes SCSI target auto-polling discovery for VSAN 1.
switch# config t
switch(config)# no scsi-target auto-poll vsan 1
The following example configures a SCSI target discovery.
switch# config t
switch(config)# scsi-target discovery
auto-poll Configures SCSI target auto polling globally or per VSAN.
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
discovery Configures SCSI target discovery.
ns-poll Configures SCSI target name server polling globally or per VSAN.
on-demand Configures SCSI targets on demand globally or per VSAN.
Release Modification
3.0(1a) This command was introduced.

Table of Contents

Other manuals for Cisco MDS 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco MDS 9000 Series and is the answer not in the manual?

Cisco MDS 9000 Series Specifications

General IconGeneral
CategorySwitch
Operating SystemCisco NX-OS
PortsVaries by model
ProtocolsFibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
RedundancyRedundant supervisors, power supplies, and fans
ManagementCisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization SupportVSANs (Virtual SANs)
Security FeaturesFibre Channel Security Protocol (FC-SP)
Hot Swappable Componentspower supplies, fans
Power Supply OptionsAC and DC options available

Related product manuals