Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
21-12
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
scsi-target
The following example removes a SCSI target discovery.
switch# config t
switch(config)# no scsi-target discovery
The following example configures SCSI target ns-polling discovery for VSAN 1.
switch# config t
switch(config)# scsi-target ns-poll vsan 1
The following example removes SCSI target ns-polling discovery for VSAN 1.
switch# config t
switch(config)# no scsi-target ns-poll vsan 1
The following example configures SCSI target on-demand discovery for VSAN 1.
switch# config t
switch(config)# scsi-target on-demand vsan 1
The following example removes SCSI target on-demand discovery for VSAN 1.
switch# config t
switch(config)# no scsi-target on-demand vsan 1
Related Commands Command Description
discover scsi-target Discovers SCSI targets on local storage to the switch or remote storage across
the fabric.
show scsi-target Displays information about existing SCSI target configurations.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available