Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-38
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear fabric-binding statistics
clear fabric-binding statistics
To clear fabric binding statistics in a FICON enabled VSAN, use the clear fabric-binding statistics
command in EXEC mode.
clear fabric-binding statistics vsan vsan-id
Syntax Description
Defaults None
Command Modes EXEC mode
Command History
Usage Guidelines None.
Examples The following example clears existing fabric binding statistics in VSAN 1.
switch# clear fabric-binding statistics vsan 1
Related Commands
vsan vsan-id Specifies the FICON-enabled VSAN. The ID of the VSAN is from 1 to 4093.
Release Modification
1.1(1) This command was introduced.
Command Description
show fabric-binding efmd statistics Displays existing fabric binding statistics information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available