Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
18-37
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
purge module
purge module
To delete configurations in the running configuration for nonexistent modules, use the purge module
command in EXEC mode.
purge module slot running-config
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines This command cannot be issued on a supervisor module.
Examples The following example displays the output of the purge module command issued on the module in
slot 8.
switch# purge module 8 running-config
switch#
slot Specifies the module slot number.
running-config Purges the running configuration from the specified module.
Release Modification
1.1(1) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available