Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-61
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ntp
clear ntp
To clear Network Time Protocol (NTP) information, use the clear ntp command in EXEC mode.
clear ntp {session | statistics {all-peers | io | local | memory}}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None mode.
Examples The following example shows how to clear NTP statistics for all peers.
switch# clear ntp statistics all-peers
The following example shows how to clear NTP statistics for I/O devices.
switch# clear ntp statistics io
The following example shows how to clear NTP statistics for local devices.
switch# clear ntp statistics local
The following example shows how to clear NTP statistics for memory.
switch# clear ntp statistics memory
Related Commands
session Clears NTP CFS session configuration and locks.
statistics Clears NTP statistics.
all-peers Clears I/O statistics for all peers.
io Clears I/O statistics for I/O devices.
local Clears I/O statistics for local devices.
memory Clears I/O statistics for memory.
Release Modification
1.0(2) This command was introduced.
Command Description
show ntp Displays the configured server and peer associations.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available