Send documentation comments to mdsfeedback-doc@cisco.com
22-99
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fctimer
show fctimer
To view the Fibre Channel timers (fctimer), use the show fctimer command.
show fctimer [d_s_tov [vsan vsan-id] | distribution status | e_d_tov [vsan vsan-id] |
f_s_tov [vsan vsan-id] | last action status | pending | pending-diff | r_a_tov [vsan vsan-id] |
session-status | vsan vsan-id]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured global TOVs.
switch# show fctimer
F_S_TOV D_S_TOV E_D_TOV R_A_TOV
----------------------------------------
5000 ms 5000 ms 2000 ms 10000 ms
d_s_tov Displays the distributed services time out value (D_S_TOV) in
milliseconds.
distribution status Displays Cisco Fabric Services (CFS) distribution status information.
e_d_tov Displays the error detection time out value (E_D_TOV) in milliseconds.
f_s_tov Displays the fabric stability time out value (F_S_TOV) in milliseconds.
last action status Displays the status of the last CFS commit or discard operation.
pending Displays the status of pending fctimer commands.
pending-diff Displays the difference between pending database and running config.
r_a_tov Displays the resource allocation time out value (R_A_TOV) in
milliseconds.
session-status Displays the state of fctimer CFS session.
vsan vsan-id Displays information for a VSAN. The range is 1 to 4093.
Release Modification
1.3(1) This command was introduced.
2.0(x) Added the distribution status, last action status, pending, pending-diff,
and session-status keywords.
To Next Page
Loading...
Need help?
General
