Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
23-3
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tacacs+ commit
tacacs+ commit
To apply the pending configuration pertaining to the TACACS+ Cisco Fabric Services (CFS) distribution
session in progress in the fabric, use the tacacs+ commit command in configuration mode.
tacacs+ commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to apply a TACACS+ configuration to the switches in the fabric.
switch# config terminal
switch(config)# tacacs+ commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
show tacacs+ Displays TACACS+ CFS distribution status and other details.
tacacs+ enable Enables TACACS+.
tacacs+ distribute Enables CFS distribution for TACACS+.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available