Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-45
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ficon
clear ficon
Use the clear ficon command in EXEC mode to clear the FICON information for the specified VSAN.
clear ficon vsan vsan-id [allegiance | timestamp]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The clear ficon vsan vsan-id allegiance command aborts the currently-executing session.
Examples The following example clears the current device allegiance for VSAN 1.
switch# clear ficon vsan 1 allegiance
The following example clears the VSAN clock for VSAN 20.
switch# clear ficon vsan 20 timestamp
Related Commands
vsan vsan-id Specifies the FICON-enabled VSAN. The ID of the VSAN is from 1 to 4093.
allegiance Clears FICON device allegiance.
timestamp Clears FICON VSAN specific timestamp.
Release Modification
1.3(1) This command was introduced.
Command Description
show ficon Displays configured FICON details.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available