Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-272
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show radius-server
show radius-server
To display all configured RADIUS server parameters, use the show radius-server command.
show radius-server [server-name | ipv4-address | ipv6-address]
[directed-request | groups | sorted | statistics]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Only administrators can view the RADIUS preshared key.
server-name Specifies the RADIUS server DNS name. The maximum character size is
256.
ipv4-address Specifies the RADIUS server IP address in the format A.B.C.D.
ipv6-address Specifies the RADIUS server IP address in the format X:X::X.
directed-request Displays an enabled directed request RADIUS server configuration.
groups Displays configured RADIUS server group information.
sorted Displays RADIUS server information sorted by name.
statistics Displays RADIUS statistics for the specified RADIUS server.
Release Modification
1.3(1) This command was introduced.
3.0(1)
• Added the server-name, ipv4-address, and ipv6-address arguments.
• Added the directed-request and statistics options.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available