Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-43
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show crypto key mypubkey rsa
show crypto key mypubkey rsa
To display any RSA public key configurations, use the show crypto key mypubkey rsa command.
show crypto key mypubkey rsa
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays RSA public key configurations.
switch# show crypto key mupubkey rsa
key label: myrsa
key size: 512
exportable: yes
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
crypto ca enroll Requests certificates for the switch’s RSA key pair.
crypto key generate
rsa
Generate an RSA key pair.
rsakeypair Configure trust point RSA key pair details

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available