Send documentation comments to mdsfeedback-doc@cisco.com
4-44
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear fc-redirect config vt
clear fc-redirect config vt
To delete a FC-Redirect configuration on a switch, use the clear fc-redirect config command.
clear fc-redirect config vt vt-pwwn [local-switch-only]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines This command is used as a last option if deleting the configuration through the application is not
possible.
This command will delete any configuration (including active configurations) on FC-Redirect created by
applications such as SME/DMM that may lead to data loss. When you enter this command, the host
server communicates to the storage array directly by passing the individual Intelligent Service
Applications causing data corruption. Use this command as a last option to clear any leftover
configuration that cannot be deleted from the application (DMM/SME). Use this command while
decommissioning the switch.
Examples The following example clears the FC-Redirect configuration on the switch.
switch# clear fc-redirect config vt 2f:ea:00:05:30:00:71:64
Deleting a configuration MAY result in DATA CORRUPTION.
Do you want to continue? (y/n) [n] y
Related Commands
vt vt-pwwn Specify the VT pWWN for the configuration to be deleted.
local-switch-only (Optional) The configuration is deleted locally only.
Release Modification
3.2(1) This command was introduced.
Command Description
show fc-redirect
active-configs
Displays all active configurations on the switch.
To Next Page
Loading...
Need help?
General
