Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-39
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show crypto ca trustpoints
show crypto ca trustpoints
To display trust point configurations, use the show crypto ca trustpoints command.
show crypto ca trustpoints
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays configured trust points.
switch# show crypto ca trustpoints
trustpoint: CAname; key:
revokation methods: crl
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
crypto ca authenticate Authenticates the certificate of the CA.
crypto ca trustpoint Declares the trust point certificate authority that the switch should trust.
show crypto ca
certificates
Displays configured trust point certificates.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available