Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
16-10
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 16 N Commands
ntp abort
ntp abort
To discard the Network Time Protocol (NTP) Cisco Fabric Services (CFS) distribution session in
progress, use the ntp abort command in configuration mode.
ntp abort
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to configure NTP CFS distribution session in progress.
switch# config terminal
switch(config)# ntp abort
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available