Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-16
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug cloud
debug cloud
To enable debugging of cloud discovery, use the debug cloud command in EXEC mode.To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
debug cloud {all | bypass ficon_mgr | cloud | conditional | demux vsan vsan-id | deque |
discovery | error | event vsan vsan-id | ha vsan vsan-id | init | member | memory | messages
| remotesync | trace [detail vsan vsan-id | vsan vsan-id] | warning [vsan-id] | xipc | xipc}
no debug cloud {all | bypass ficon_mgr | cloud | conditional | demux vsan vsan-id | deque |
discovery | error | event vsan vsan-id | ha vsan vsan-id | init | member | memory | messages
| remotesync | trace [detail vsan vsan-id | vsan vsan-id] | warning [vsan-id] | xipc | xipc}
Syntax Description
Defaults None.
Command Modes EXEC mode.
all Enables debugging of all features of the cloud.
bypass Enables some components in cloud execution to be bypassed during
debugging.
ficon_mgr Enables the FICON manager to be bypassed during debugging.
cloud Enables debugging of all cloud commands.
conditional Enables debugging of the cloud discovery conditional service.
demux Enables debugging of the cloud message demux.
vsan vsan-id Restricts debugging to the specified VSAN ID. The range is 1 to 4094.
deque Enables debugging of the cloud message dequeue.
discovery Enables debugging of the discovery process.
error Enables debugging of the cloud errors.
event Enables debugging of the cloud finite state machine (FSM) and events.
ha Enables debugging of cloud high availability (HA).
init Enables debugging of cloud discovery initialization.
member Enables debugging of cloud member changes.
memory Enables debugging of cloud memory allocation.
messages Enables debugging of cloud discovery messaging and transaction service
(MTS) messages.
remotesync Enables debugging of discovery remote sync.
trace Enables debugging of the cloud trace.
detail Enables debugging of the cloud detailed trace.
warning Enables debugging of cloud warnings.
xipc Enables debugging of XIPC messages.
xipc Enables debugging of cloud data serialization.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available