Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-50
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show debug
show debug
To display the debug commands configured on the switch, use the show debug command in EXEC
mode.
show debug all [aaa | acl | arbiter | ascii-cfg | bootvar | callhome | capability | cdp | v | cimserver
| cloud | confcheck | core | device-alias | dstats | epp | ethport | exceptionlog |
fabric_start_cfg_mgr | fc-tunnel | fc2 | fc2d | fcc | fcdomain | fcfwd | fcns | fcs | fdmi | flogi
| fs-daemon | fspf | fvp | idehsd | ilc_helper | ipacl | ipconf | ipfc | kadb | kipfc | klm-scsi-target
| license | logfile | mcast | mip | module | ntp | platform
| port | port-channel | qos | radius |
rdl | redundancy | rib | rlir | rscn | scsi-flow | scsi-target | security | sensor | snmp | span |
system | SystemHealth | tcap | tlport | ttyd | vni | vp | vrrp | vsan | vshd | wwn | xbar | xbc |
zone]
Syntax Description aaa Displays the debugging flags for 301.
acl Displays the debugging flags for the ACL manager.
arbiter Displays the debugging flags for arbiter.
ascii-cfg Displays the debugging flags for ascii-cfg.
bootvar Displays the debugging flags for bootvar.
callhome Displays the debugging flags for Call Home.
capability Displays the debugging flags for capability.
cdp Displays the debugging flags for the Cisco Discovery Protocol (CDP).
cfs Displays the debugging flags for Cisco Fabric Services (CFS).
cimserver Displays the debugging flags for the CIM server.
cloud Displays the debugging flags for cloud.
confcheck Displays the debugging flags for confcheck.
core Displays the debugging flags for the feature manager.
device-alias Displays the debugging flags for Distributed Device Alias Services.
dstats Displays the debugging flags for delta statistics.
epp Displays the debugging flags for EPP.
ethport Displays the debugging flags for Ethernet port.
exceptionlog Displays the debugging flags for the exception logger.
fabric_start_cfg_mgr Displays the debugging flags for the fabric startup configuration manager.
fc-tunnel Displays the debugging flags for MPLS tunnel.
fc2
Displays the debugging flags for FC2.
fc2d Displays the debugging flags for FC2D.
fcc Displays the debugging flags for FCC.
fcdomain Displays the internal debugging flags for FC domain.
fcfwd Displays the debugging flags for FCFWD.
fcns Displays the debugging flage for the name server.
fcs Displays the debugging flags for the Fabric Config server.
fdmi Displays the debugging flags for FDMI.
flogi Displays the debugging flags for the F port server.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available