Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
5-39
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
dpvm commit
dpvm commit
To apply the pending configuration pertaining to the dynamic port VSAN membership (DPVM) Cisco
Fabric Services (CFS) distribution session in progress in the fabric, use the dpvm commit command.
dpvm commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example shows how to commit changes to the DPVM database.
switch# config terminal
switch(config)# dpvm commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
dpvm distribute Enables CFS distribution for DPVM.
dpvm enable Enables DPVM.
show dpvm Displays DPVM information.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available