Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-34
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cores
show cores
To display all the cores presently available for upload from active sup, use the show cores command.
show cores
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples In the following example, an FSPF core was generated on the active supervisor (slot 5), an FCC core on
the standby supervisor (slot 6) and acltcam and fib on module (slot 8).
switch# show cores
Module-num Process-name PID Core-create-time
---------- ------------ --- ----------------
5 fspf 1524 Jan 9 03:11
6 fcc 919 Jan 9 03:09
8 acltcam 285 Jan 9 03:09
8 fib 283 Jan 9 03:08
Release Modification
1.0(2) This command was introduced.

Cisco MDS 9000 Series Specifications

General

Brand	Cisco
Model	MDS 9000 Series
Category	Switch
Language	English