Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-295
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show santap module dvt brief
The following example displays the SANTap vttbl DVT host configuration.
switch# show santap vttbl dvt 50:00:1f:e1:50:0c:3b:09 host 10:00:00:00:c9:3f:90:21
HI-LIST Entry :
State : PRLI
UA Power On : 1
FIT Created : 1
NVP Index : 0x10000000c93f9021
HI-LUNS Entry :
Number of LUNs : 4
DVT ID : 0x83f978c
HI Index : 0
LUNs Installed : TRUE
Target Lun, DVT Lun pairs :
(0, 0)(1, 1)(2, 2)(3, 3)
Related Commands Command Description
show santap vttbl Displays the santap vttbl configuration.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available