Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-11
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show banner motd
show banner motd
To display a configured message of the day (MOTD) banner, use the show banner motd command.
show banner motd
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines The configured MOTD banner is displayed before the login prompt on the terminal whenever a user logs
in to a switch.
Examples The following example displays the configured banner message.
switch# show banner motd
Testing the MOTD Feature
The configured message is visible the next time you log in to the switch:
Testing the MOTD Feature
switch login:
Related Commands
Release Modification
1.3(4) This command was introduced.
Command Description
banner motd Configures the required banner message.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available