Cisco MDS 9000 Series

Send documentation comments to mdsfeedback-doc@cisco.com
22-344
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show telnet server
show telnet server
To display the state of the Telnet access configuration, use the show telnet server command.
show telnet server
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the status of the Telnet server.
switch# show telnet server
telnet service enabled
Release Modification
1.0(2) This command was introduced.