Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
6-134
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug zone
debug zone
To enable debugging for zones, use the debug zone command in EXEC mode. To disable a debug
command, use the no form of the command or use the no debug all command to turn off all debugging.
debug zone {all |
change {errors | events | packets} |
database {detail | errors | events} |
gs errors {errors | events | packets} |
lun-zoning {errors | events | packets} |
merge {errors | events | packets} |
mts notifications |
pss {errors | events} ||
read-only-zoning {errors | events | packets} |
tcam errors {errors | events | packets} |
transit {errors |
events}} [vsan vsan-id]
no debug zone {all |
change {errors | events | packets} |
database {detail | errors | events} |
gs errors {errors | events | packets} |
lun-zoning {errors | events | packets} |
merge {errors | events | packets} |
mts notifications |
pss {errors | events} ||
read-only-zoning {errors | events | packets} |
tcam errors {errors | events | packets} |
transit {errors | events}} [vsan vsan-id
]
Syntax Description all Enables all zone server debug options.
vsan vsan-id Restricts debugging to the specified VSAN.
change Enables debugging for change protocol messages.
database Enables debugging for the zone database messages.
errors Enables debugging for zone errors.
events Enables debugging for zone events.
packets Enables debugging for zone packets.
database Enables debugging for database messages.
gs Enables debugging for GS protocol messages.
lun-zoning Enables debugging for LUN zoning messages.
merge Enables debugging for merge protocol messages.
mts notification Enables debugging for MTS notification messages.
pss Enables debugging for PSS debug messages
read-only-zoning Enables debugging for read-only Zoning messages.
tcam Enables debugging for TCAM messages.
transit Enables debugging for transit frame messages.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available