Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-25
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cfs regions
The following example shows the list of applications without peers in a region.
switch# show cfs regions brief
---------------------------------------
Region Application Enabled
---------------------------------------
1 callhome yes
1 ntp yes
The following example shows the peer and region information for a given application in a region.
switch# show cfs regions name callhome
Region-ID : 1
Application: callhome
Scope : Physical-all
-------------------------------------------------------------------------
Switch WWN IP Address
-------------------------------------------------------------------------
20:00:00:0d:ec:06:55:c0 10.64.66.47 [Local]
switch 1
Total number of entries = 1
Related Commands Command Description
cfs regions Creates a region that restricts the scope of application distribution to a
selected switch.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available