Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
4-40
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear fcflow stats
clear fcflow stats
To clear Fibre Channel flow statistics, use the clear fcflow stats command in EXEC mode.
clear fcflow stats [aggregated] module module-number index flow-number
Syntax Description
Defaults None.
Command Modes EXEC.
Command History
Examples The following example shows how to clear aggregated Fibre Channel flow statistics for flow index 1 of
module 2.
switch(config)# # clear fcflow stats aggregated module 2 index 1
Related Commands
aggregated Clears the Fibre Channel flow aggregated statistics.
module Clears the statistics for a specified module.
module-number Specifies the module number.
index Clears the Fibre Channel flow counters for a specified flow index.
flow-number Specifies the flow index number.
Release Modification
1.0(2) This command was introduced.
Command Description
show fcflow Displays the fcflow statistics.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available